Customs tariff code 8205.10.00: Drilling, threading or tapping tools
Reference data as at 1 July 2026
Customs tariff code 8205.10.00 covers Drilling, threading or tapping tools. The third-country duty rate is 1.7 %, plus import VAT.
8205.10.00 is CN code in the EU customs tariff, in chapter 82. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8205.10.00
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 4
Where this code sits in the tariff
- 82TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
- 8205Hand tools (including glaziers' diamonds), not elsewhere specified or included; blowlamps; vices, clamps and the like, other than accessories for and parts of machine-tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks
- 8205.10Drilling, threading or tapping tools
- 8205.10.00Drilling, threading or tapping tools
From HS code to customs tariff code 8205.10.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| San Marino | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Въртоци за нарязване на резба (вътрешна и външна). Представляват ръчни инструменти изработени от стомана, в които се фиксират сменяеми приставки за нарязване на резба – метричи за вътрешна резба и плашки за външна резба. Вътрокът за метрич е с дължина 180 mm и диаметър на дръжките 7 mm и е снабден с подвижни челюсти. Въртокът за плашка е с дължина 210 mm, диаметър на гнездото 25 mm и е снабден с 5 фиксиращи винта. Инструментите служат за фиксиране на сменяемите приставки и осигуряване на въртеливо движение при нарязване на резбата. Фиксирането се осъществява съответно чрез подвижни челюсти за метрича и чрез застопоряващите винтове за плашката. Дръжките на въртоците осигуряват допълнителни рамена за по-лесно въртеливо движение и предаване на усилието при нарязване на резбата.
Outil de perçage à main constitué d'un manche et d'une pointe. Celui-ci est destiné à agrandir et nettoyer un trou de crevaison dans un pneu de véhicule afin de pouvoir insérer une mèche de réparation. Le manche de l’outil est en matière plastique et la partie travaillante pointue et torsadée en acier carbone. Dimensions du produit: 13,5 (L) x 8,5 (l) cm. Diamètre de la partie pointue: 4mm.
OUTIL A MAIN EN METAL COMMUN (ALUMINIUM) AVEC UNE POIGNEE EN PLASTIQUE SE PRESENTANT SOUS LA FORME D'UN PISTOLET DE DEPOINTAGE. IL EST DESTINE POUR LE PERCAGE DES SOUDURES PAR POINTS REALISEES SUR DE L'ACIER A HAUTE RESISTANCE. LA GACHETTE ERGONOMIQUE PERMET DE CONTROLER LA ROTATION ET LA PENETRATION DU FORET. POIDS : 2.5 KG ET DIAMETRE DU CORPS DE FORET : 8 MM.
"Nailart-Bohrer" Es handelt sich um mit freiem Arm zu handhabende Werkzeuge mit einem in einen Messinggriff fest eingesetzten Bohrer aus Stahl von ca. 85 mm Länge. Der Griff ist zur besseren Handhabung teilweise geriffelt und weist am oberen Ende einen mit einer farbigen Kunststoffverzierung versehenen, drehbaren Knopf auf, der das Drehen des Bohrers erleichtert. Der Griff ist mittig aufschraubbar, so dass die Seite mit Bohrer im Schaft verstaut und ebenfalls verschraubt werden kann. Die Erzeugnisse dienen zum Bohren von Vertiefungen zur Aufnahme von bspw. Strasssteinchen beim Verzieren von künstlichen Fingernägeln. Abbildung siehe Anlage. Das Werkzeug ist in einem an beiden Steiten durch Kappen verschlossenen Kunststoffröhrchen verpackt. Derartige Erzeugnisse gehören als "andere Handwerkzeuge, anderweit weder genannt noch inbegriffen - Bohrwerkzeuge" zur Unterposition 8205 1000 der Kombinierten Nomenklatur (KN).
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Position umfasst, abgesehen von bestimmten, genau bezeichneten Werkzeugen, alle Handwerkzeuge, die nicht in anderen Positionen dieses Kapitels oder in anderen Positionen der Nomenklatur erfasst sind (siehe die Erläuterungen zu diesem Kapitel Abschnitt „Allgemeines“). Zu dieser Position gehören eine große Anzahl von Handwerkzeugen, auch mit einfachen mechanischen Vorrichtungen wie Kurbeln oder Zahnradübersetzungen. Diese Werkzeuge sind: A) Bohrwerkzeuge, Gewindeschneid- oder Gewindebohrwerkzeuge wie Brustbohrer, Handbohrer, Drillbohrer, Bohrknarren, Schneidkluppen, Windeisen. Auswechselbare Werkzeuge (z. B. Bohrer, Gewindeschneidbacken, Gewindebohrer) zum Einsetzen in diese Handwerkzeuge gehören zu Pos. 8207. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 641/2013 der Kommission vom 24. Juni 2013 (ABl. EU Nr. L 186, Seite 1) (RV L641/13) 1. Eine für den Einzelverkauf aufgemachte Warenzusammenstellung, ein sogenanntes Kaminbesteck, bestehend aus: - einem gusseisernen Geräteständer, - einem Schürhaken, - einer Schaufel, - einer Zange. Sie ist zum Hantieren mit Kohle, Holzscheiten und Asche in einem Kamin bestimmt. Unterposition 8205 51 00 Einreihung gemäß den Allgemeinen Vorschriften 1, 3 b und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 8205 und 8205 51 00. …
1. Außer Lötlampen, tragbaren Feldschmieden, Schleifsteine mit Gestell, Zusammenstellungen für die Hand- oder Fußpflege und Waren der Position 8209 erfasst Kapitel 82 nur Waren mit Klinge oder arbeitendem Teil: a) aus unedlem Metall (RV E8201A00); b) aus Metallcarbiden oder aus Cermets (RV E8201B00); c) aus Edelsteinen oder Schmucksteinen (natürlichen, synthetischen oder rekonstituierten), auf einem Träger aus unedlem Metall, Metallcarbid oder Cermet (RV E8201C00); d) aus Schleifstoffen auf einem Träger aus unedlem Metall, sofern es sich um Werkzeuge handelt, deren Zähne, Schneiden oder andere trennende oder schneidende Teile auch nach Aufbringen von Schleifstoffen ihre eigentliche Funktion beibehalten (RV E8201D00). 2. …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8205.10.00 cover?
Code 8205.10.00 covers Drilling, threading or tapping tools. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8205.10.00?
The third-country duty rate for 8205.10.00 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8205.10.00?
The first six digits form the HS code: 820510. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8205.10.00 have?
8205.10.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8205.10.00 sit in the tariff?
8205.10.00 sits in this hierarchy: 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL > 8205 Hand tools (including glaziers' diamonds), not elsewhere specified or included; blowlamps; vices, clamps and the like, other than accessories for and parts of machine-tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks > 820510 Drilling, threading or tapping tools. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8205.10.00?
Yes. The EBTI database holds decisions on 8205.10.00, for example BGBTIBG009999-2023-BTI104. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8205.10.00 change?
8205.10.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.