Customs tariff code 7326.19.90: Other
Reference data as at 1 July 2026
Customs tariff code 7326.19.90 covers Other. The third-country duty rate is 2.7 %, plus import VAT.
7326.19.90 is CN code in the EU customs tariff, in chapter 73. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7326.19.90
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 7326.19.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Andorra | 0 % | Customs Union Duty |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
| Tunisia | 0 % | Tariff preference |
| Morocco | 0 % | Tariff preference |
| Lebanon | 0 % | Tariff preference |
| Jordan | 0 % | Tariff preference |
| Egypt | 0 % | Tariff preference |
| EEA - European Economic Area | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0016Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Stalowy element monolitycznej budowy o kształcie pustego w środku zamkniętego profilu o prostokątnym przekroju poprzecznym. W bocznych ściankach elementu są wykonane różnej wielkości okrągłe, owalny i prostokątne otwory przelotowe. Na jednej ściance otwory okrągłe i owalny są otoczone wystającymi na zewnątrz kołnierzami. Element powstał z taśmy w procesie jej tłoczenia na prasie, a następnie był tylko olejowany w celu ochrony powierzchni przed korozją. Niektóre przybliżone wymiary wynoszą: przekrój poprzeczny około (3,5 x 5) cm, długość około 5,5 cm, otwór owalny około (2 x 3) cm. Element nie jest wyrobem wykończonym – gotowym do użytku. Później będzie pokrywany tworzywem sztucznym, klejem i zwulkanizowany. Docelowym jego przeznaczeniem jest zastosowanie do mocowania silnika hybrydowego w samochodach osobowych. WIT wydana powtórnie w miejsce decyzji nr PL BTI WIT-2023-000136 z dnia 30.01.2023 r.
Potrivit informatiilor si imaginilor furnizate de solicitant, produsele reprezinta articole plate din tabla de otel galvanizat, cu grosimea de 0,3–0,45 mm, obtinute prin operatiuni de stantare la dimensiuni prestabilite. Produsele sunt prezentate sub forma unor piese plate, de diferite dimensiuni, de forma dreptunghiulara si circulara, avand contururi si decupaje specifice rezultate in urma procesului de stantare, fara a fi prelucrate altfel. Acestea sunt livrate neasamblate, sub forma de piese stivuite, fara ambalare individuala, fiind concepute pentru utilizarea la fabricarea corpului si capacelor cosurilor de gunoi metalice.
Es handelt sich um vollständig aus Stahl gefertigte, zylindrische Erzeugnisse, die an einem Ende eine kreisrunde, zentrische Ausformung und am anderen Ende eine kreisrunde, zentrische Vertiefung mit abgeschrägter Seitenwandung aufweisen. Die Außenseite der Waren ist abgestuft. Die gesenkgeschmiedeten Erzeugnisse werden in weiteren Bearbeitungsschritten zu einem sog. Sonnenrad (Zahnrad) weiterverarbeitet. Außendurchmesser: 168 mm. - Antragstellerangaben - Derartige Erzeugnisse gehören als "andere Waren aus Stahl, geschmiedet, jedoch nicht weiter bearbeitet" zur Unterposition 7326 1990 der Kombinierten Nomenklatur.
Dle deklarovaných údajů se jedná o kroužek z nerezavějící nízkouhlíkové oceli. Výrobek je zhotoven ražením plechu za studena a není dále opracovaný. Zboží je součástí sklo-kovové průchodky používané v automobilovém průmyslu.
Conform descrierii solicitantului și a fotografiei publicate în baza de date, produsul reprezintă o placă suport din tablă din oțel, obținută prin ștanțare, pentru o unitate de control electronică folosită la sistemul de camere al autovehiculului pentru păstrarea distanței de siguranță. Aceasta oferă protecție împotriva factorilor chimici, climatici și mecanici. Asigură o disipare eficientă a căldurii în condiții extreme de mediu în interiorul vehiculului. Adițional, servește ca punct de împământare și oferă protecție împotriva trăsnetului și ecranare în ceea ce privește compatibilitatea electromagnetică.
Dle poskytnutých údajů se jedná o výrobek (díl) z nerezavějící oceli, který tvoří tzv. základnu sklo-kovové průchodky. Průchodka je součástí víčka k mikrobateriím. Díl je vyroben ražením bez dalšího opracování. Průměr: 10,092 mm.
Dle poskytnutých údajů se jedná o výrobek (díl) z nerezavějící oceli, který tvoří tzv. základnu sklo-kovové průchodky. Průchodka je součástí víčka k mikrobateriím. Díl je vyroben ražením bez dalšího opracování. Průměr: 7,8 mm.
Dle poskytnutých údajů se jedná o výrobek (díl) z nerezavějící oceli, který tvoří tzv. základnu sklo-kovové průchodky. Průchodka je součástí víčka k mikrobateriím. Díl je vyroben ražením bez dalšího opracování. Průměr: 12,5 mm.
Notes that govern this classification
Zu Unterpositionen 7326 11 und 7326 19: Die Waren dieser Unterpositionen können nach dem Schmieden folgende Bearbeitungen oder Oberflächenbearbeitungen erfahren haben: Das Beseitigen von Graten, Nähten und anderen Schmiedefehlern durch grobes Abgraten, Abschleifen, Hämmern, Schroten oder Feilen; das Beizen mit Säuren zur Beseitigung des Zunders; einfaches Reinigen mit dem Sandstrahlgebläse; grobes Vorarbeiten oder Vorschruppen oder grobes Blankscheuern sowie andere Bearbeitungen, lediglich zur Prüfung auf Fehlerfreiheit; grobes Überziehen mit Grafit, Öl, Teer, Mennige und dergleichen, das offensichtlich dazu bestimmt ist, die Gegenstände gegen Rost oder sonstige Oxydation zu schützen; Einprägen, Einstempeln, Aufdrucken usw. einfacher Aufschriften z. B. Warenzeichen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 1030/86 der Kommission vom 8. April 1986 (ABl. EG Nr. L 95/13) (RV L 1030/86), in der Fassung der Verordnung (EWG) Nr. 2080/91 der Kommission vom 16. Juli 1991 (ABl. EG Nr. L 193/6), geändert durch Verordnung (EG) Nr. 705/2005 der Kommission vom 4. Mai 2005 (ABl. EU Nr. L 118/18), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Bundefinanzhofs vom 28. Februar 2023, RS VII R 21/20 Leitsätze 1 NV: Die Voraussetzungen für eine Tarifierung von im Wesentlichen aus Stahl gefertigten Lenk- und Bockrollen unter die Codenummer 8716 90 90 90 0 sind nur dann erfüllt, wenn die aus den objektiven Wareneigenschaften erkennbare ausschließliche oder hauptsächliche Zweckbestimmung der betreffenden Teile die Verwendung für nicht selbstfahrende Fahrzeuge der Pos. 8716 KN ist. Anderenfalls unterfallen die Lenk- und Bockrollen wegen ihrer Beschaffenheit als "Andere Waren aus Eisen oder Stahl" der Codenummer 7326 90 98 90 0. 2 NV: Die Entscheidung des FG, ob ein solcher Hauptverwendungszweck erkennbar ist, stellt eine Tatsachenwürdigung dar, die das Revisionsgericht nach § 118 Abs. …
Zu Position 7326: Hierher gehören auch Spannschlösser (auch als „Spannschrauben“ bezeichnet), die beispielhaft folgendes Aussehen haben: Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes - 180. Sitzung des Ausschusses für den Zollkodex vom 3. bis 6. Juli 2017): Warenbeschreibung (Ware 1): Hängemattengestell aus Stahl, verstellbar. Es dient als Standgestell für eine Hängematte aus Stoff. Maximale Maße: 395 cm (L) x 99 cm (B) x 145 cm (H). Minimale Maße: 311 cm (L) x 99 cm (B) x 112 cm (H). Gewicht: 15 kg Einreihung: Die Ware ist in Anwendung der Allgemeinen Vorschriften 1 und 6 in die Unterposition 7326 90 98 einzureihen. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7326.19.90 cover?
Code 7326.19.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7326.19.90?
The third-country duty rate for 7326.19.90 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7326.19.90?
The first six digits form the HS code: 732619. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7326.19.90 have?
7326.19.90 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7326.19.90 sit in the tariff?
7326.19.90 sits in this hierarchy: 73 ARTICLES OF IRON OR STEEL > 7326 Other articles of iron or steel > 732619 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7326.19.90?
Yes. The EBTI database holds decisions on 7326.19.90, for example PLBTIWIT-2026-000593. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7326.19.90 covered by CBAM?
Yes. 7326.19.90 appears in Annex I of the CBAM regulation (sector Iron and steel). Importers report embedded emissions and surrender CBAM certificates.
Is 7326.19.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7326.19.90 to 0016. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7326.19.90 change?
7326.19.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.