Customs tariff code

Customs tariff code 7018.10.51.00: Cut and mechanically polished

Reference data as at 24 July 2026

Customs tariff code 7018.10.51.00 covers Cut and mechanically polished. The third-country duty rate is 0 %, plus import VAT.

7018.10.51.00 is TARIC code in the EU customs tariff, in chapter 70. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
7018.10.51.00
Third-country duty
0 %
Declarable
No
Binding rulings
8

Where this code sits in the tariff

  1. 70GLASS AND GLASSWARE
  2. 7018Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares, and articles thereof other than imitation jewellery; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewellery; glass microspheres not exceeding 1 mm in diameter
  3. 7018.10Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares
  4. 7018.10.51Cut and mechanically polished
  5. 7018.10.51.00Cut and mechanically polished

From HS code to customs tariff code 7018.10.51.00

HS code7018.106 digits, uniform worldwide
CN code7018.10.518 digits, EU Combined Nomenclature
TARIC code7018.10.51.0010 digits, carries the EU measures

Duty rates and preferences

OriginDuty rateBasis
Third-country duty0 %MFN
Algeria0 %Tariff preference
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
Türkiye0 %Customs Union Duty
Andorra0 %Customs Union Duty
San Marino0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Binding tariff information for this code

CZBTI47/256936/2024-580000-04/01Issued by CZValid until 2028-02-10

Dle poskytnutých údajů se jedná o šatonový nýt, který slouží ke zdobení sedlářských, obuvnických a textilních výrobků. Šaton, který je dodáván v hranaté či kulaté variantě, je vložen do hlavy nýtu a nýt tak slouží jen jako jeho „nosič". Materiál: šaton (imitace drahokamu) - broušené sklo; nýt - poniklovaná mosaz (případně jiná povrchová úprava). Hmotnost: 0,31 g (šaton - 0,15 g, nýt - 0,16 g). Rozměr: průměr hlavy nýtu - 6 až 8 mm.

ATBTI2024000101-DECIssued by ATValid until 2026-02-18

Nachahmungen von Schmucksteinen und ähnliche Glaskurzwaren und Waren daraus - in Form von Buchstaben/Zahlen, - bestehend aus Strasssteinen mit geschliffenen Kanten und Flächen, welche auf selbstklebenden und unterschiedlich eingefärbten Unterlagen aufgebracht sind. (Abbildung siehe Anlage)

ATBTI2020000421-DECIssued by ATValid until 2024-01-11

Nachahmung eines Edelsteines, - bestehend aus einem kugelförmigen, glasklaren Rohling aus hochbrechendem Spezialglas, - mit einer speziell geschliffenen Außenseite, - den Kopf einer Glasfigur darstellend. (Abbildung siehe Anlage)

ATBTID2019000382-3Issued by ATValid until 2022-08-25

Edelsteinnachbildung aus Glas - in Form von Strasssteinen mit Metallplättchen, welche als Motiv (in Form eines V) auf einer Kunststofffolie angeordnet sind, - zusammengestellt aus abwechselnd runden Steinen mit scharfkantigen Flächen und runden, silberfarbenen Metallplättchen, deren Rückseiten mit einem thermoplastischen Kunststoff (auf Polyamidbasis) überzogen sind und welche keine Einfassung besitzen, - auf der Vorder- und Rückseite mit einer Schutzfolie abgedeckt, - geschliffen und mechanisch poliert, - die Strasssteine werden als wesensbestimmend angesehen, - laut Hersteller Verwendung in der Textilindustrie (kann auf Stoff aufgebügelt werden). (Abbildung siehe Anlage)

ATBTID2019000380-5Issued by ATValid until 2022-08-25

Edelsteinnachbildung aus Glas - in Form einer Zusammenstellung von zwei runden, einem ovalen und zwei rechteckigen Edelsteinimitaten, vorpositioniert auf einer Kunststofffolie, - mit scharfkantigen Flächen verarbeitet, auf der Rückseite mit einem thermoplastischen Kunststoff (auf Polyamidbasis) überzogen, - die runden Steine besitzen eine silberfarbene, alle anderen Steine keine Einfassung, - auf der Vorder- und Rückseite mit einer Schutzfolie abgedeckt, - geschliffen und mechanisch poliert, - laut Hersteller Verwendung in der Textilindustrie (kann auf Stoff aufgebügelt werden). (Abbildung siehe Anlage)

ATBTID2019000379-2Issued by ATValid until 2022-08-25

Edelsteinnachbildung aus Glas - als Motiv (in Form eines Schönschrift B) auf einer Kunststofffolie angeordnet, - von runder Form mit scharfkantigen Flächen, mit thermoplastischer Rückseite (auf Polyamidbasis), keine Einfassung, - geschliffen und mechanisch poliert, - auf der Vorder- und Rückseite mit einer Schutzfolie abgedeckt, - laut Hersteller Verwendung in der Textilindustrie (kann auf Stoff aufgebügelt werden). (Abbildung siehe Anlage)

ESBTIESBTI2018SOL142-3Issued by ESValid until 2021-07-26

Imitación a una piedra preciosa, de vidrio, presentada conjuntamente con una cruceta de latón, a la que se adapta perfectamente, con función decorativa para paredes alicatadas con baldosas (azulejos) cerámicas. Está destinada a ser insertada en el punto donde se juntan 4 baldosas cerámicas. La pieza de la parte superior es un cristal tallado y pulido, mecánicamente, de Swarovski. La cruceta es de fundición de latón. Ambas piezas se unen por presión. Se presentan para la venta al por menor en un blíster con 4 unidades.

DE6016/15-1Issued by DEValid until 2021-05-18

Nachahmungen von Edelsteinen, sog. Schmucksteine, Foto siehe Anlage, - in Form von Diamant-Imitationen (Diamantschliff), - aus gewöhnlichem, klarsichtigem Glas; laut Antrag geschliffen und mechanisch poliert, - auf der Unterseite messingfarben bemalt, - mit Durchmessern von ca. 3 mm. "Nachahmungen von Edelsteinen, geschliffen und mechanisch poliert"

Notes that govern this classification

Pos. 7018

Zu Unterpositionen 7018 1051 und 7018 1059 Hierher gehören die in den Erläuterungen zu Position 7018 des HS, zweiter Absatz Buchstabe C, beschriebenen Waren. Zu Unterposition 7018 1051 Die geschliffenen und mechanisch polierten Nachahmungen von Edelsteinen und Schmucksteinen dieser Unterposition unterscheiden sich von den gleichen so genannten „feuerpolierten“ Waren (Unterposition 7018 1059) durch ihre vollständig glatten und scharfkantig abgegrenzten Schleifflächen.

Kapitel 70

1. Zu Kapitel 70 gehören nicht: a) Waren der Position 3207 (z. B. Schmelzglasuren und andere verglasbare Massen, Glasfritten, anderes Glas in Form von Pulver, Granalien oder Flocken) (RV E7001A00); b) Waren des Kapitels 71 (z. B. Fantasieschmuck) (RV E7001B00); c) Kabel aus optischen Fasern der Position 8544, elektrische Isolatoren (Position 8546) oder Isolierteile der Position 8547 (RV E7001C00); d) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, gerahmt, für Fahrzeuge der Kapitel 86 bis 88 (RV E7001D00); e) Frontscheiben (Windschutzscheiben), Heckscheiben und andere Scheiben, auch gerahmt, mit Heizvorrichtungen oder anderen elektrischen oder elektronischen Vorrichtungen ausgerüstet, für Kraftfahrzeuge der Kapitel 86 bis 88 (RV E7001E00); f) optische Fasern, optisch bearbeitete optische Elemente, Injektionsspritzen, künstliche Augen, Thermometer, Barometer, Dichtem …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 7018.10.51.00 cover?

Code 7018.10.51.00 covers Cut and mechanically polished. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 7018.10.51.00?

The third-country duty rate for 7018.10.51.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.

What is the HS code for 7018.10.51.00?

The first six digits form the HS code: 701810. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 7018.10.51.00 have?

7018.10.51.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.

Where does 7018.10.51.00 sit in the tariff?

7018.10.51.00 sits in this hierarchy: 70 GLASS AND GLASSWARE > 7018 Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares, and articles thereof other than imitation jewellery; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewellery; glass microspheres not exceeding 1 mm in diameter > 701810 Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares > 70181051 Cut and mechanically polished. The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 7018.10.51.00?

Yes. The EBTI database holds decisions on 7018.10.51.00, for example CZBTI47/256936/2024-580000-04/01. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Does customs tariff code 7018.10.51.00 change?

7018.10.51.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.